dmesg - NVIDIA GeForce GTX 980M
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-27-generic (buildd@lgw01-12) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #32-Ubuntu SMP Fri Jan 22 04:49:08 UTC 2016 (Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 0x440 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000083599fff] usable
BIOS-e820: [mem 0x000000008359a000-0x000000008359afff] ACPI NVS
BIOS-e820: [mem 0x000000008359b000-0x00000000835e4fff] reserved
BIOS-e820: [mem 0x00000000835e5000-0x0000000083636fff] usable
BIOS-e820: [mem 0x0000000083637000-0x0000000083a47fff] reserved
BIOS-e820: [mem 0x0000000083a48000-0x0000000086de2fff] usable
BIOS-e820: [mem 0x0000000086de3000-0x000000008775dfff] reserved
BIOS-e820: [mem 0x000000008775e000-0x0000000087857fff] usable
BIOS-e820: [mem 0x0000000087858000-0x0000000087babfff] ACPI NVS
BIOS-e820: [mem 0x0000000087bac000-0x0000000087fa3fff] reserved
BIOS-e820: [mem 0x0000000087fa4000-0x0000000087ffdfff] type 20
BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable
BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008767fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x87ee2f98 ACPI=0x87b70000 ACPI 2.0=0x87b70000 SMBIOS=0x87ee1000 SMBIOS 3.0=0x87ee0000
esrt: Reserving ESRT space from 0x0000000087ee2f98 to 0x0000000087ee2fd0.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x876800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008A000000 mask 7FFE000000 uncachable
5 base 0089000000 mask 7FFF000000 uncachable
6 base 0088800000 mask 7FFF800000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02ff0000, 0x02ff0fff] PGTABLE
BRK [0x02ff1000, 0x02ff1fff] PGTABLE
BRK [0x02ff2000, 0x02ff2fff] PGTABLE
init_memory_mapping: [mem 0x876600000-0x8767fffff]
[mem 0x876600000-0x8767fffff] page 2M
BRK [0x02ff3000, 0x02ff3fff] PGTABLE
init_memory_mapping: [mem 0x860000000-0x8765fffff]
[mem 0x860000000-0x8765fffff] page 2M
init_memory_mapping: [mem 0x840000000-0x85fffffff]
[mem 0x840000000-0x85fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x83599fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x833fffff] page 2M
[mem 0x83400000-0x83599fff] page 4k
init_memory_mapping: [mem 0x835e5000-0x83636fff]
[mem 0x835e5000-0x83636fff] page 4k
BRK [0x02ff4000, 0x02ff4fff] PGTABLE
init_memory_mapping: [mem 0x83a48000-0x86de2fff]
[mem 0x83a48000-0x83bfffff] page 4k
[mem 0x83c00000-0x86bfffff] page 2M
[mem 0x86c00000-0x86de2fff] page 4k
BRK [0x02ff5000, 0x02ff5fff] PGTABLE
init_memory_mapping: [mem 0x8775e000-0x87857fff]
[mem 0x8775e000-0x87857fff] page 4k
init_memory_mapping: [mem 0x87ffe000-0x87ffefff]
[mem 0x87ffe000-0x87ffefff] page 4k
init_memory_mapping: [mem 0x100000000-0x83fffffff]
[mem 0x100000000-0x83fffffff] page 1G
RAMDISK: [mem 0x340f0000-0x3606ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000087B70000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000087B700A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000087B89AE0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000087B701F0 0198E9 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000087BABF80 000040
ACPI: APIC 0x0000000087B89BF0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000087B89CB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000087B89CF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000087B89D98 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000087B89DD8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000087B89E10 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: SSDT 0x0000000087B8A128 002557 (v01 NvdRef NvdTabl 00001000 INTL 20120913)
ACPI: SSDT 0x0000000087B8C680 001100 (v01 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: DBGP 0x0000000087B8D780 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000087B8D7B8 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087B8D810 005655 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000087B92E68 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000087B92EB0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x0000000087B93D08 000778 (v02 Intel PerfTune 00001000 INTL 20120913)
ACPI: BGRT 0x0000000087B94480 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x0000000087B944B8 000070 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: TPM2 0x0000000087B94528 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: ASF! 0x0000000087B94560 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008767fffff]
NODE_DATA(0) allocated [mem 0x8767f5000-0x8767f9fff]
[ffffea0000000000-ffffea0021dfffff] PMD -> [ffff880855e00000-ffff880875dfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000008767fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000083599fff]
node 0: [mem 0x00000000835e5000-0x0000000083636fff]
node 0: [mem 0x0000000083a48000-0x0000000086de2fff]
node 0: [mem 0x000000008775e000-0x0000000087857fff]
node 0: [mem 0x0000000087ffe000-0x0000000087ffefff]
node 0: [mem 0x0000000100000000-0x00000008767fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000008767fffff]
On node 0 totalpages: 8376862
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8555 pages used for memmap
DMA32 zone: 547458 pages, LIFO batch:31
Normal zone: 122272 pages used for memmap
Normal zone: 7825408 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8359a000-0x8359afff]
PM: Registered nosave memory: [mem 0x8359b000-0x835e4fff]
PM: Registered nosave memory: [mem 0x83637000-0x83a47fff]
PM: Registered nosave memory: [mem 0x86de3000-0x8775dfff]
PM: Registered nosave memory: [mem 0x87858000-0x87babfff]
PM: Registered nosave memory: [mem 0x87bac000-0x87fa3fff]
PM: Registered nosave memory: [mem 0x87fa4000-0x87ffdfff]
PM: Registered nosave memory: [mem 0x87fff000-0x87ffffff]
PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
PM: Registered nosave memory: [mem 0x88100000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x88100000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880876400000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8245949
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32820076K/33507448K available (8154K kernel code, 1238K rwdata, 3804K rodata, 1460K init, 1292K bss, 687372K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2710.791 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5421.58 BogoMIPS (lpj=10843164)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30933 entries in 121 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000874d8000 end: 0x000000874f7fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6820HK CPU @ 2.70GHz (fam: 06, model: 5e, stepping: 03)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (43372.65 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x8359a000-0x8359afff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x87858000-0x87babfff] (3489792 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 1:46:29, date: 02/16/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 20 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8808518A4C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8808518AA800 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8808518AB000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88085189FA00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x88800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1617] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xdf315000-0xdf315fff]
pci 0000:02:00.0: reg 0x30: [mem 0xdf300000-0xdf30ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.1: reg 0x18: [mem 0xdf314000-0xdf314fff 64bit]
pci 0000:02:00.1: reg 0x20: [mem 0xdf310000-0xdf313fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:03:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:00.0: [144d:a802] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xdf110000-0xdf113fff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8359a000-0x83ffffff]
e820: reserve RAM buffer [mem 0x83637000-0x83ffffff]
e820: reserve RAM buffer [mem 0x86de3000-0x87ffffff]
e820: reserve RAM buffer [mem 0x87858000-0x87ffffff]
e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
e820: reserve RAM buffer [mem 0x876800000-0x877ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x3322-0x3323] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1219 PNP0f13 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x88800000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32256K (ffff8800340f0000 - ffff880036070000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7e851000-0x82851000] (64MB) mapped at [ffff88007e851000-ffff880082850fff]
microcode: CPU0 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU1 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU2 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU3 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU4 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU5 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU6 sig=0x506e3, pf=0x20, revision=0x55
microcode: CPU7 sig=0x506e3, pf=0x20, revision=0x55
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455587189.620:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (57 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-27-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-27-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: failed to peer usb2-port4 and usb1-port3 by location (usb2-port4:none) (usb1-port3:usb2-port3)
usb usb2-port4: failed to peer to usb1-port3 (-16)
usb: port power management may be unreliable
usb: failed to peer usb2-port5 and usb1-port3 by location (usb2-port5:none) (usb1-port3:usb2-port3)
usb usb2-port5: failed to peer to usb1-port3 (-16)
usb: failed to peer usb2-port7 and usb1-port7 by location (usb2-port7:none) (usb1-port7:usb2-port6)
usb usb2-port7: failed to peer to usb1-port7 (-16)
usb: failed to peer usb2-port8 and usb1-port7 by location (usb2-port8:none) (usb1-port7:usb2-port6)
usb usb2-port8: failed to peer to usb1-port7 (-16)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9421ce78f7dd6932d7a71d3bab89bb036afa29eb'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:515:761
rtc_cmos 00:02: setting system clock to 2016-02-16 01:46:30 UTC (1455587190)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 24K (ffff8800027fa000 - ffff880002800000)
Freeing unused kernel memory: 292K (ffff880002bb7000 - ffff880002c00000)
random: systemd-udevd urandom read with 13 bits of entropy available
hidraw: raw HID events driver (C) Jiri Kosina
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
acpi device:13: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 123
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
scsi host0: ahci
r8169 0000:02:00.1 eth0: RTL8411 at 0xffffc9000317c000, 80:fa:5b:24:64:92, XID 1c800880 IRQ 125
r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b200 irq 124
ata4: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b280 irq 124
r8169 0000:02:00.1 enp2s0f1: renamed from eth0
nvme0n1: p1 p2 p3 p4
usb 1-5: new full-speed USB device number 2 using xhci_hcd
usb 1-5: New USB device found, idVendor=046d, idProduct=c52b
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Receiver
usb 1-5: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: supports DRM functions and may not be fully accessible
tsc: Refined TSC clocksource calibration: 2711.977 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717708b8a3, max_idle_ns: 440795291562 ns
ata3.00: disabling queued TRIM support
ata3.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133
ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-7: new full-speed USB device number 3 using xhci_hcd
input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404A.0004/input/input12
logitech-hidpp-device 0003:046D:404A.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:00:14.0-5:1
usb 1-7: New USB device found, idVendor=1c7a, idProduct=0603
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: EgisTec_ES603
usb 1-7: Manufacturer: EgisTec
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: READ LOG DMA EXT failed, trying unqueued
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-8: new full-speed USB device number 4 using xhci_hcd
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-9: new high-speed USB device number 5 using xhci_hcd
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount mnt-FileDepot.automount.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Set up automount mnt-Incoming.automount.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716]
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Show Plymouth Boot Screen...
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Journal Service.
systemd-journald[277]: Received request to flush runtime journal from PID 1
resource sanity check: requesting [mem 0xfed40040-0xfed4103f], which spans more than MSFT0101:00 [mem 0xfed40000-0xfed4087f]
------------[ cut here ]------------
WARNING: CPU: 2 PID: 317 at /build/linux-NgsOGa/linux-4.2.0/arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2c5/0x380()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in:
acpi_pad(+) tpm_crb(+) mac_hid(+) parport_pc ppdev lp parport autofs4 hid_logitech_hidpp hid_logitech_dj usbhid rtsx_pci_sdmmc psmouse nvme r8169 ahci rtsx_pci mii libahci pinctrl_sunrisepoint i2c_hid video pinctrl_intel hid
CPU: 2 PID: 317 Comm: systemd-udevd Not tainted 4.2.0-27-generic #32-Ubuntu
Hardware name: System76, Inc. Oryx Pro/Oryx Pro, BIOS 1.05.09RSA1 11/16/2015
0000000000000000 000000009164c143 ffff88084bcaf948 ffffffff817eae99
0000000000000000 ffff88084bcaf9a0 ffff88084bcaf988 ffffffff8107b9c6
ffff88084bcaf9b8 00000000fed40040 ffffc900035f0040 0000000000001000
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x86/0xc0
[] warn_slowpath_fmt+0x55/0x70
[] __ioremap_caller+0x2c5/0x380
[] ioremap_nocache+0x17/0x20
[] devm_ioremap_nocache+0x3d/0x80
[] crb_acpi_add+0x108/0x2d0 [tpm_crb]
[] acpi_device_probe+0x50/0xf7
[] driver_probe_device+0x21a/0x490
[] __driver_attach+0x90/0xa0
[] ? driver_probe_device+0x490/0x490
[] bus_for_each_dev+0x6c/0xc0
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1eb/0x280
[] ? 0xffffffffc0127000
[] driver_register+0x60/0xe0
[] acpi_bus_register_driver+0x3b/0x43
[] crb_acpi_driver_init+0x10/0x1000 [tpm_crb]
[] do_one_initcall+0xb3/0x200
[] ? __vunmap+0x95/0xf0
[] ? kmem_cache_alloc_trace+0x187/0x1f0
[] ? do_init_module+0x28/0x1e7
[] do_init_module+0x60/0x1e7
[] load_module+0x1676/0x1c10
[] ? __symbol_put+0x60/0x60
[] ? kernel_read+0x50/0x80
[] SyS_finit_module+0xb9/0xf0
[] entry_SYSCALL_64_fastpath+0x16/0x75
---[ end trace cc4b5716d003ee17 ]---
usb 1-9: New USB device found, idVendor=5986, idProduct=066d
usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-9: Product: BisonCam, NB Pro
usb 1-9: Manufacturer: Generic
usb 1-9: SerialNumber: 200901010001
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..]
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.0 build 90 week 25 2015
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
clocksource: Switched to clocksource tsc
nvidia: module verification failed: signature and/or required key missing - tainting kernel
random: nonblocking pool is initialized
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-15.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-14.ucode failed with error -2
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
Adding 8388604k swap on /dev/nvme0n1p2. Priority:-1 extents:1 across:8388604k SSFS
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: can't access the RSA semaphore it is write protected
snd_hda_intel 0000:00:1f.3: failed to add i915 component master (-19)
EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3163, fw id: 1924066
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
media: Linux media interface: v0.10
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
Linux video capture interface: v2.00
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:066d)
input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
audit: type=1400 audit(1455587192.147:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.175:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.175:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.175:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.175:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.175:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.175:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=595 comm="apparmor_parser"
audit: type=1400 audit(1455587192.187:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=595 comm="apparmor_parser"
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: Error connecting to socket. Aborting operation.
/dev/vmmon[833]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[833]: Using tsc_khz as TSC frequency: 2711977
/dev/vmmon[833]: Module vmmon: initialized
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: cifs_mount failed w/return code = -101
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: can't access the RSA semaphore it is write protected
NET: Registered protocol family 40
aufs 4.x-rcN-20150629
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: can't access the RSA semaphore it is write protected
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
/dev/vmnet: open called by PID 1037 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlp3s0: device is wireless, enabling SMAC
bridge-wlp3s0: up
bridge-wlp3s0: attached
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge-wlp3s0: disabling the bridge
IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:02:00.1 enp2s0f1: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
bridge-wlp3s0: down
bridge-wlp3s0: detached
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
/dev/vmnet: open called by PID 1037 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-docker0: up
bridge-docker0: attached
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
/dev/vmnet: open called by PID 1205 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1208 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1222 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-4: sent link down event.
userif-4: sent link up event.
/dev/vmnet: open called by PID 1223 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1227 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
bridge-docker0: disabling the bridge
bridge-docker0: down
bridge-docker0: detached
userif-4: sent link down event.
userif-4: sent link up event.
wlp3s0: authenticate with dc:ef:09:95:64:e2
wlp3s0: direct probe to dc:ef:09:95:64:e2 (try 1/3)
wlp3s0: send auth to dc:ef:09:95:64:e2 (try 2/3)
wlp3s0: authenticated
wlp3s0: associate with dc:ef:09:95:64:e2 (try 1/3)
wlp3s0: RX AssocResp from dc:ef:09:95:64:e2 (capab=0x11 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
/dev/vmnet: open called by PID 1037 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlp3s0: device is wireless, enabling SMAC
bridge-wlp3s0: up
bridge-wlp3s0: attached
userif-4: sent link down event.
userif-4: sent link up event.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
userif-4: sent link down event.
userif-4: sent link up event.